21
The handlebar assembly also uses an over center clamp. Press the latch handle into position so the
handle is parallel to the stem riser. The safety latch for stem riser should automatically engage when
the latch handle is in fully closed position. Pull out slightly on the handle to confirm safety latch is
engaged.
Step 3: Install Battery
The battery should already be installed when you receive the bike.
To remove/install the battery:
a. Insert key and turn counterclockwise to unlock battery.
b. Make sure seat post is extended at least 3 inches (75mm) to allow space for the battery to be
lifted under seat.
c. Grasp the battery on both sides and pull it
up.
d. The battery will slide up and slightly away
from the seat post as it comes out of
battery dock.
e. Carefully remove battery from inside
frame.
