58
corrosion is not covered under warranty so special care should be given to extend life of bike when
used in coastal areas or areas with salty air or water.
-
If hub and bottom bracket bearings have been submerged in water or liquid, they take out and re-
grease. This will prevent accelerated bearing deterioration.
-
If paint has become scratched or chipped in metal, use touch up paint to prevent rust. Clear nail
polish can also be used as a preventative measure.
-
Do not store near electric motors, which can destroy rubber and paint.
-
Regularly clean and lubricate all moving parts, tighten components, and adjust as required.
-
Regularly inspect all pre-attached and optional component hardware to ensure tight and secure
attachment, and good working condition.
Tire Pressure & Inspection
-
See the side wall of bike tires for proper size for bike. These tires use a rubber inner tube to
retain air pressure. The tires are designed for typical terrain and surfaces bike was intended to be
used on. Only replace tires with a similar tire design of same size.
-
Always check all items related to Tires and Wheels listed in Pre-Ride Check before each ride.
If you do not have the experience, skill, and tools to complete maintenance and adjustment
of your bike, Young Electric bikes strongly recommends having a certified, reputable bike
mechanic maintain, tune, and ensure the bike is safe to ride.
⚠
CAUTION
