Table of contents
Copyright
1. Introduction
5
1.1.
Scope of this manual
5
1.2.
Reference documentation
5
1.3.
Symbols used in this manual
5
1.4.
Guidelines and useful information for maintenance
5
1.5.
Product identification
6
2. Warranty and Liability
7
2.1.
Warranty
8
2.2.
Liability
9
3. Safety
10
3.1.
Maximum user weight reduction when EQLASS is installed on an XP
10
3.2.
Personnel qualifications
10
3.3.
Cautions and warning statements
10
3.4.
Pictograms on the wheelchair
11
4. Maintenance schedule & tooling
12
4.1.
Overview of scheduled maintenance tasks
12
4.2.
Mechanical tools
13
4.3.
Electronical tools
14
4.4.
Torque table
14
5. Maintenance tasks & adjustments
15
5.1.
General preparations for maintenance
15
5.2.
Carrier
17
5.2.1.
Replace the carbon brushes
17
5.2.2.
Replace a drive motor
17
5.2.3.
Replace a drive wheel
19
5.2.4.
Replace a castor wheel
19
5.2.5.
Replace a castor fork
20
5.2.6.
Replace the batteries
20
5.2.7.
Replace main fuse
21
5.3.
Interface (all types)
22
5.3.1.
Adjust the position of the interface
22
5.3.2.
Adjust the base height of the interface
23
5.4.
Tilt-only interface
23
5.4.1.
Replace the Tilt Actuator (Tilt-only Interface)
23
5.5.
Tilt + lift interface
24
5.5.1.
Replace the tilt actuator
24
5.5.2.
Replace lift actuator
24
5.6.
Legrests
25
5.6.1.
Replace the actuator of a powered Legrest
25
5.6.2.
Replace the gasspring of a comfort legrest
25
5.6.3.
Replace the actuator of the central legrest
26
5.6.4.
Replace the motor of the central legrest
26
5.7.
Seating system QLASS
27
5.7.1.
Replace the actuator of the backrest
27
5.7.2.
RepIace the tilt actuator 25 degrees
28
5.8.
Seating system EQLASS
28
5.8.1.
Replace the actuator of the backrest
28
5.8.2.
RepIace the tilt actuator
29
5.9.
General completion of maintenance
30
Table of contents
3