5.
Maintenance tasks & adjustments
5.1.
General preparations for maintenance
This chapter describes the general preparations that apply for all maintenance and repairs
to the wheelchair.
WARNING!
Only do maintenance on an empty wheelchair.
NOTICE!
The frames of the wheelchair differ per drive type (FWD or RWD). Most
illustrations in this manual show the FDW drive. For most maintenance tasks
the difference in drive type does not matter. In case that is does matter, this is
clearly shown in this manual.
1.
Switch off the wheelchair via the button on the controller.
2.
Set both freewheel switches in 'Drive' mode.
3.
Tilt the interface mounting frame forward for
easy access as follows:
a. Remove the screws A.
b. Tilt the frame (B) until it locks in the tilted
position.
A
B
4.
Remove the battery cover.
B
A
C
Maintenance tasks & adjustments
Service manual - XP
15