JOHNSON CONTROLS
23
FORM 155.33-ICOM2.EN.GB
ISSUE DATE:12/4/2017
3
SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY
LD18119
FIGURE 3 -
WARNING
Rigging and lifting should only be
done by a professional rigger in
accordance with a written plan. The
most appropriate rigging and lifting
method will depend on job spe-
cific factors, such as the equipment
available and site needs. Therefore,
a professional rigger must deter-
mine the rigging and lifting method
to be used. It is beyond the scope of
this manual to specify rigging and
lifting details.
This chiller-heater is for air conditioning or cooling a
manufacturing process. Transport, store, and use this
chiller-heater under the following conditions:
Installation location: Indoor, non-explosion area
Ambient temperature: 10 ~ 40 °C
Humidity:
10 ~ 90% (RH%)
Altitude:
1000 m or lower
If the plant room will ever get below 10 °C, you must
have the cold ambient option.
Outdoor installation is not recommended.
If you do install the unit in an outdoor
location, be sure to keep all access doors
and windows closed. Rain and pollutants
will cause problems if they get into the
unit.
