York YCIV Series, Installation Operation & Maintenance

Page: 116 / 326

JOHNSON CONTROLS
116
FORM 201.23-NM2
ISSUE DATE: 09/25/2020
SECTION 6 - TECHNICAL DATA
Models YCIV0197E/V, YCIV0207S/P/H, and YCIV0227S/P/H
VIEW C-C
VIEW B-B
12"
CONTROL ENTRY
3" WIDE X 13 1/2" HIGH
1 1/2"
4"
POWER ENTRY
10" WIDE X 13" HIGH
1 3/4"
POWER ENTRY IS ON BOTTOM OF PANEL
88 1/8"
B (EDGE OF UNIT
TO COOLER
CONNECTION)
A
C
B B
VIEW A-A
C
YCIV A B C D
0197E/V 20.4" 28.1" 85.6" 112.3"
0207S/P/H
22.2" 26.0" 79.1" 113.3"
0227S/P/H 22.2" 26.0" 79.1" 113.3
DIMENSIONS - 2 & 3 COMPRESSOR ENGLISH (CONT'D)
POWER ENTRY
10" WIDE X 13"
HIGH
Placement on a level surface of free of
obstructions (including snow, for winter
operation) or air circulation ensures rated
performance, reliable operation, and ease
of maintenance. Site restrictions may
compromise minimum clearances indi-
cated below, resulting in unpredictable
airflow patterns and possible diminished
performance.
Johnson Controls unit controls will op-
timize operation without nuisance high-
pressure safety cutouts; however, the
system designer must consider potential
performance degradation. Access to the
unit control center assumes the unit is no
higher than on spring isolators. Recom-
mended minimum clearances: side to wall
– 2 m; rear to wall – 2 m; control panel to
end wall – 1.2 m; top – no obstructions
whatsoever; distance between adjacent
units – 3 m. No more than one adjacent
wall may be higher than the unit.