YORK INTERNATIONAL
82
BAS INTERFACE
(REMOTE RESET OPTION)
The Remote Reset Option allows resetting of the wa-
ter temperature setpoint using a 0-10 VDC input, a 4-
20mA input, or a dry contact. The electronic circuitry in
the option converts the signals mentioned, above into
pulse width modulated (PWM) signals which the mi-
croprocessor can understand. Whenever an offset is
called for, the change may be noted by the user by
pressing the REMOTE RESET TEMP/RANGE key on
the keypad. All refresh requirements normally associ-
ated with PWM inputs will be automatically taken care
of by the electronics in the option.
It is important to note that the maximum offset, when
NOTES:
1. Remove header covers and discard.
2. Attach items 20, 21, 25, 38, 39, 40 & 41 before attach-
ing louver panels.
LD02015
LD02016
R.H. END VIEW
L.H. END VIEW