York YCAS0295EB, Installation Operation & Maintenance

Page: 82 / 194

82 YORK INTERNATIONAL
FORM 201.19-NM7 (804)
FIG. 28 –
MODEL YCAS0605 DIMENSIONS
DIMENSIONS – YCAS0605
All dimensions
are in mm un less
oth er wise not ed.
NOTES:
1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reli-
able operation and ease of maintenance. Site re stric tions may compromise minimum clearances indicated below, resulting in un pre dict able
air
ß ow patterns and possible diminished performance. YORK’s unit controls will optimize op er a tion without nuisance high pres sure safety
cutout; however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is
no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m;
top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit.
46 (EDGE OF
UNIT TO COOLER
CONNECTION
LD03745g
LD03745b