manualshive.com logo in svg

York YCAS0295EB, Installation Operation & Maintenance

Share
Download
York YCAS0295EB Installation Operation & Maintenance Download Page 48

48

YORK INTERNATIONAL

FORM 201.19-NM7 (804)

Technical Data

PHYSICAL DATA

SI UNITS

NOTE:

     1.  Optional 21 Bar Waterside available.

                    

Refrigerant R-407C Optimized 

                                                                                                    MODEL NUMBER YCAS                                                                     

            

                                                                                  0295EB          0335EB         0375EB         0425EB           0475EB          0515EB        0555EB          0575EB          0605EB 

General Unit Data                                                                                                                                                                                                                                                                                

     

Unit Capacity at 7°C water & 35°C ambient, kW                        260                  308                  364                 397                     446                  495                 527                  558                   584 

      Number of Independent Refrigerant Circuits                                 2                      2                      2                     2                         2                      2                     2                      2                       2
      Refrigerant Charge, R-407C, Ckt.-1 / Ckt.-2, kg                        55/55               55/65               65/65              79/79                 79/85                85/85             85/88                88/88               94/94 
      Oil Charge, Ckt.-1 / Ckt.-2, liters                                                19/19               19/19               19/19              19/19                 19/19                19/19             19/19                19/19               19/19
      Shipping Weight:                                                                                                                                                                                                                                                                             
           Aluminum Fin Coils, kg                                                         4,240               4,433               4,565              5,620                 5,704                5,779             5,805                5,834               6,253 
           Copper Fin Coils, kg                                                             4,648               4,841               4,974              6,182                 6,276                6,351             6,376                6,406               6,944 
       Operating Weight:                                                                                                                                                                                                                                                                          
           Aluminum Fin Coils, kg                                                         4,349               4,551               4,674              5,943                 6,015                6,092             6,115                6,145               6,563 
           Copper Fin Coils, kg                                                             4,757               4,960               5,083              6,505                 6,587                6,664             6,687                6,716               7,255 
Compressors, DXS Semihermetic Twin Screw                                                                                                                                                                                                                                  
           Quantity per Chiller                                                                  2                      2                      2                     2                         2                      2                     2                      2                       2
      Nominal kW Size, Ckt.-1 / Ckt.-2                                             145 / 145         145 / 190         190 / 190        190 / 190           190 / 250          250 / 250       250 / 280          280 / 280         280 / 280
Condensers, High Effi ciency Fin / Tube with Integral Subcooler                                                                                                                                                                                                     
Total Chiller Coil Face Area, m

2

                                                       17.84               17.84               17.84              23.78                 23.78                23.78             23.78                23.78               29.73

      Number of Rows                                                                            3                      3                      3                     3                         3                      3                     3                      3                       3
      Fins per meter                                                                             512                  512                  512                 512                     512                  512                 512                  512                   512 
Condenser Fans                                                                                                                                                                                                                                                                                    
      Number, Ckt.-1 / Ckt.-2                                                                3 / 3                 3 / 3                 3 / 3                4 / 4                   4 / 4                  4 / 4               4 / 4                  4 / 4                 5 / 5
Standard Fans                                                                                                                                                                                                                                                                                       
      Fan Motor, HP / kW                                                                   2 / 1.6              2 / 1.6              2 / 1.6             2 / 1.6                 2 / 1.6              2 / 1.6             2 / 1.6              2 / 1.6               2 / 1.6
      Fan & Motor Speed, revs./sec.                                                    15.8                 15.8                 15.8                15.8                   15.8                  15.8               15.8                  15.8                 15.8 
      Fan Diameter, mm                                                                       900                  900                  900                 900                     900                  900                 900                  900                   900
      Fan Tip Speed, m/sec.                                                                 45                    45                    45                   45                       45                    45                   45                    45                     45 
      Total Chiller Airfl ow, l/sec.                                                          37,660             37,660             37,660            50,213               50,213              50,213           50,213              50,213             62,767 
Low Noise Fans                                                                                                                                                                                                                                                                                     
      Fan Motor, HP / kW                                                                   2 / 1.7              2 / 1.7              2 / 1.7             2 / 1.7                 2 / 1.7              2 / 1.7             2 / 1.7              2 / 1.7               2 / 1.7
      Fan & Motor Speed, revs./sec.                                                    11.5                  11.5                 11.5                11.5                   11.5                  11.5               11.5                  11.5                 11.5
      Fan Diameter, mm                                                                       900                  900                  900                 900                     900                  900                 900                  900                   900
      Fan Tip Speed, m/sec.                                                               33.75               33.75               33.75              33.75                 33.75                33.75             33.75                33.75               33.75
      Total Chiller Airfl ow, l/sec.                                                          36,811              36,811             36,811            49,081               49,081              49,081           49,081              49,081             61,351 
High External Static Fans                                                                                                                                                                                                                                                                     
      Fan Motor, HP / kW                                                                   5 / 3.8              5 / 3.8              5 / 3.8             5 / 3.8                 5 / 3.8              5 / 3.8             5 / 3.8              5 / 3.8               5 / 3.8
      Fan & Motor Speed, revs./sec.                                                    16.1                 16.1                 16.1                16.1                   16.1                  16.1               16.1                  16.1                 16.1
      Fan Diameter, mm                                                                       900                  900                  900                 900                     900                  900                 900                  900                   900
      Fan Tip Speed, m/sec.                                                                45.5                 45.5                 45.5                45.5                   45.5                  45.5               45.5                  45.5                 45.5
      Total Chiller Airfl ow, l/sec.                                                         

37,660             37,660             37,660            50,213               50,213              50,213           50,213              50,213             62,767

             (at 100 Pa external static)
Evaporator, Direct Expansion                                                                                                                                                                                                                                                              
      Water Volume, liters                                                                    143                  143                  143                 309                     309                  309                 309                  309                   309 
      Maximum

1

 Water Side Pressure, Bar                                           10                    10                    10                   10                       10                    10                   10                    10                     10 

      Maximum Refrigerant Side Pressure, Bar                                    24                    24                    24                   24                       24                    24                   24                    24                     24 
      Minimum Chilled Water Flow Rate, l/s                                         6.94                 7.70                 8.58                9.53                  10.60                11.67             12.37                13.06               13.63 
      Maximum Chilled Water Flow Rate, l/s                                       25.42               25.42               25.42              37.85                 42.27                46.87             48.45                48.45               48.45 
      Water Connections, inches                                                            6                      6                      6                     8                         8                      8                     8                      8                       8

Summary of Contents for YCAS0295EB



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands