York YCAS 0138EB, Installation Operation & Maintenance

Page: 88 / 184

88
JOHNSON CONTROLS
FIG. 28 – MODEL YCAS0138EB DIMENSIONS (SI)
DIMENSIONS – YCAS0138EB (SI)
Technical Data
multiple point power.
2-compressor unit with
DO NOT USE unless
B B
C
C
406
2321
ALTERNATIVE
POWER OPENING
(178 WIDE x
533 HIGH)
CONTROL CENTER
MICRO-COMPUTER
OPTIONS PANEL
COILS
SYS.#2
COILS
SYS.#1
VIEW A-A
CONNECTION)
BASE TO COOLER
59 (EDGE OF
CONTROL
TRANSFORMER
SERVICE SWITCH
POWER: MULTIPLE POINT WITH TERMINAL BLOCKS
1067
800
51
178
191
(12) 13
305
711
51 TYP.
229
51
120
OPENING
(229 HIGH)
CONTROL
VIEW C-C
CONTROL ENTRY
CONDUIT K.O.'S
VIEW B-B
RECOMMENDED
POWER OPENING
(533 HIGH)
NOTES:
1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance, reliable
operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpredictable air flow
patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pressure safety cutout;
however, the system designer must consider potential performance degradation. Access to the unit control center assumes the unit is no
higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control panel end to wall - 1.2m;
top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be higher than the unit.
All dimensions
are in mm unless
otherwise noted.
LD05834A
LD05835A