York Sunline 2000, Technical Manual

Page: 20 / 24

036-21060-004-A-1102
20 Unitary Products Group
FIGURE 4: ACCESSORY SIDE SUPPLY AND RETURN AIR OPENINGS
SUPPLY
AIR
RETURN
AIR
OUTDOOR
AIR
5-1/8"
18-5/8"
27-3/4"
39-5/8"
40-1/2"
OUTDOOR AIR
COMPARTMENT
ACCESS
FILTER
ACCESS
1" NPT FEMALE
COND. DRAIN
CONNECTION
DOT PLUG
(For pressure
drop reading)
EVAPORATOR
SECTION
CONDENSER
SECTION
GAUGE LINE
ACCESS
40-3/8"
5-1/2"
COMPRESSOR
ACCESS
SUPPLY AIR
ACCESS
RETURN AIR
ACCESS
REAR
VIEW
DUCT COVERS - Units are shipped with the bottom duct
openings covered. An accessory flange kit is available for
connecting side ducts.
For bottom duct applications:
1. Remove the side panels from the supply and return air
compartments to gain access to the bottom supply and
return air duct covers.
2. Remove and discard the bottom duct covers. (Duct
openings are closed with sheet metal covers except
when the unit includes a power exhaust option. The cov-
ering consists of a black paper composition.)
3. Replace the side supply and return air compartment
panels.
For side duct applications:
1. Replace the side panels on the supply and return air
compartments with the accessory flange kit panels.
2. Connect ductwork to the duct flanges on the rear of the
unit.
FIGURE 5: UNIT WITH RAIN HOOD
SUPPLY AIR
COMPARTMENT
POWER EXHAUST
RAIN HOOD
(on Return Air Compartment)
ECONOMIZER
MOTORIZED
DAMPER
RAIN HOOD
(on Outdoor Air Compartment)
ECONOMIZER
/
MOTORIZED DAMPER
AND POWER EXHAUST RAIN HOODS
FIXED
OUTDOOR
AIR
INTAKE HOOD
(located on
Return Air
Compartment)
25 (1")
CONDENSTATE
DRAIN
(Must be trapped)
REAR VIEW
LH VIEW
914 (36")
1689
(66-1/2")
2337
(92")
921
(36-1/4")
127 (5")
870
(34-1/4")
410
(16-1/8")
51
(2")
FIGURE 6: CENTER OF GRAVITY
BACK
APPR APPROXIMA XIMATE TE
CENTER OF GRA CENTER OF GRAVITY VITY
CONDENSER
COIL END
FRONT
1376
(56")
1078
(44")
2254
(92")
3338 (136-1/4") "