15
English
SERVICE AND MAINTENANCE
Service Parts
Indoor air
filter
Indoor unit
Maintenance Procedures
1. Remove any dust adhering to the filter by using a
vacuum cleaner or wash in lukewarm water (below
40°C/104°F) with a neutral cleaning detergent.
2. Rinse the filter well and dry before placing it back
onto the unit.
3. Do not use gasoline, volatile substances or chemicals
to clean the filter.
1. Clean any dirt or dust on the grille or panel by wiping
it with a soft cloth soaked in lukewarm water (below
40°C/104°F) and a neutral detergent solution.
2. Do not use gasoline, volatile substances or chemicals
to clean the indoor unit.
Period
At least once
every 2 weeks.
More frequently if
necessary.
At least once
every 2 weeks.
More frequently if
necessary.
AUTO RANDOM RE-START FUNCTION
If there is a power cut when the unit is operating, it will automatically resume the same operating
mode when the power is restored.
1. Open the front panel.
• Hold the panel at the recesses on the main
unit (2 recesses on right and left sides) and
lift it until it stops.
2. Remove the front panel.
• While lifting the front panel further, slide
it to the right and pull it to the front side.
The left rotating shaft is detached. Slide the
right rotating shaft to the left and pull it to
the front side to remove it.
3. Attach the front panel.
• Align the right and left rotating shafts of
the front panel with the grooves and push
them all the way in.
• Gently close the front panel. (Push both
ends and the center on the front panel.)
Rotating shaft
Recess on
main unit
!
CAUTION
•
Don’t touch the metal parts of the indoor unit. It may cause an injury.
•
When removing or attaching the front panel, support the panel securely with hand to
prevent it from falling.
•
For cleansing, do not use hot water above 40°C, benzine, gasoline, thinner, nor other
volatile oils, polishing compound, scrubbing brushes, nor other hand stuff.
•
After cleaning, make sure that the front panel is securely fixed.