![background image](http://html1.mh-extra.com/html/york/hic4008b21s/hic4008b21s_engineering-manual_4020634047.webp)
OPTIONAL PARTS
TC-17005-rev.1
3-9
3.8.4 Accessories / Options
No.
Accessory
Qty.
Remarks
1
IR Receiver Kit
C4IRK01
1
With Connecting Cable
2
Connecting
Cable
1
-
3
Wiring Cover
1
For Protection of
Connecting Cable
4
Cable Band
3
For Securing Wiring Cover
and Connecting Cable
5
Installation Manual
1
-
6
Operation Manual
1
-
3.8.5 Installation
1
Perform the installation work for the IR receiver kit while the optional decorative panel is being attached to
the indoor unit.
2
When the IR receiver kit is attached after the decorative panel is attached to the indoor unit, turn OFF the
power supply of the indoor unit, and remove the decorative panel. Removing the decorative panel should
be performed according to the Installation Manual for the decorative panel or the Service Manual.
3
This IR receiver kit can be attached to any of four corners: 1 , 2 , 3 and 4 .
Determine the attachment location according to the purchaser’s request.
NOTE:
The DIP switch setting for the IR receiver kit is
possible at more than one function. If the optional
function selection is required, perform work
according to the section, “Optional Functions”
before the IR receiver kit is attached to the
decorative panel.
4
Connect the accessory connecting cable to the terminal
block.
Open the electrical box cover of the indoor unit. Attach
the connecting cable to terminals A and B in the electrical
box. (There is no polarity with terminals A and B.)
MP/
N
R/L1
S/L2
2
1
B
A
B
A
Electrical Box
Terminal Block for
Controller
Mark Band “B”
Mark Band “A”
Connecting
Cable
Decorative Panel
1
2
3
4