![background image](http://html1.mh-extra.com/html/york/hic4008b21s/hic4008b21s_engineering-manual_4020634015.webp)
FEATURES
TC-17005-rev.1
1-7
(3) Simplified panel wiring
The panel wiring connector is located inside the air inlet grille.
No need to open the electrical box cover for panel wiring work.
(4) Ability to easily install the air grille direction at a 90° position
Suspension bolt pitch is 29-15/16 inches × 29-15/16 inches (760mm × 760mm). No need to change
the bolt position for matching the unit direction with a pipe connection position. Grille direction can be
selected in four ways. This results in a pleasing and flexible layout of multiple units’ installation.
(5) Improvement of piping workability
Workability is improved by a different location of refrigerant piping and condensate piping.
● Easy Maintenance
(1) Easy to check condensate condition and condensate work
A condensate plug is equipped as part of the air inlet grille to simplify checking of condensate condition
and emergency condensate work by just removing the air inlet grille. In addition, the condensate plug
diameter is 7/8 inch (22mm) to enhance maintenance effectiveness.
(2) Antibacterial agent for condensate pan
A silver ions antibacterial agent is in the condensate pan. It inhibits the generation of mold or bacteria
which is the cause of clogging.
(3) Clean and Easy-Care
The form of louver enables smooth blowing and prevents smudging and stains on the ceiling surface.
Underside of louver can be easily cleaned.