Conveyor Supports
York conveyors are not designed to be a
self-supporting structure or part of a truss
system. The conveyor must be supported at
every section connection (10’ 0” [3,048 mm])
with structures similar to what is
shown below
. It
is the responsibility of the owner and contractor
<3>
Pre-Assembly
to provide adequate conveyor support. York
conveyors are also not designed to support
other equipment such as cleaners, distributors,
spouting, etc. Separate structures must be
provided for any extra equipment.
24
GLOBAL
INDUSTRIES, INC.
Drag Conveyors
10230011
2016-06-14
i
IMPORTANT NOTE: Never weld the conveyor
to support structures. Always bolt to allow for
component replacement and realignment after
possible structure settling.
kas010-1_2012-12-03
Support
conveyor at
each 10’ 0”
[3,050 mm]
section
connection.