www.yorkfitness.com
10
Final Check
Your exercise cycle is now assembled.
Please make the following final checks:
• Make sure all screws / bolts are tightened.
• Make sure the equipment is on a flat, level surface.
RPM SPEED
RESET
RECOVER
Y
SET
MODE
TIME
DISTANCE
PULSE
Batteries Replacement Instructions
1. Remove the meter from the exercise cycle.
2. Open the battery compartment cover.
3. Remove battery by pulling the battery in direction of spring and lift
opposite end upwards.
4. Insert 2 AA batteries ensuring you match the polarity markings (+ and -) on
the batteries with the indicators in the battery compartment. Push flat end
( - ) against spring and when clear push other end into holder.
5. Close the battery compartment.
Tips & Warnings
• Always change both batteries at the same time.
• Always use the same type of batteries.
• Never recharge Alkaline AA batteries.
• Do not try to heat, ignite, disassemble or throw AA batteries into a fire.
• Do not leave old batteries in the console, and remove batteries from the console
if you won’t be using it for a long time.
Protect the environment by not disposing of this product or
batteries with household waste. Check your local authority for
recycling advice and facilities.
Assembly Instructions
