York Fitness YBR-AC-110 Cyle, Owner'S Manual

Page: 12 / 20

www.yorkfitness.com 12
Operational Instructions
Display Function
DISPLAY DESCRIPTION
SCAN • The sequence of display: RPM > SPD > TM > DST > CAL > PLS
• In SCAN mode, press MODE key to display the next functions.
• Automatically scan through each mode in sequence every 6 seconds.
SPEED
(SPD)
• SPEED will display “0.0” if there are no signal transmitted to the monitor for 4 seconds.
• Range 0 ~ 99.9
RPM • RPM will display “0” if there are no signal transmitted to the monitor for 4 seconds.
• Range 0 ~ 999
TIME
(TM)
• If the user do not setup a preset value, TM will count up during workout.
• TM will count down from your target value. An alarm will sound when it reaches 0.
• Range 00:00 ~ 99:59
DISTANCE
(DST)
• If the user do not setup a preset value, DST will count up during workout.
• DST will count down from your target value. An alarm will sound when it reaches 0.
• Range 0:00 ~ 99:99
CALORIE
(CAL)
• If the user do not setup a preset value, CAL will count up during workout.
• CAL will count down from your target value. An alarm will sound when it reaches 0.
• Range 0 ~ 9999
PULSE
(PLS)
• Hold on the hand pulse sensors and PLS will display your current pulse after receiving your pulse signal
for 6 seconds.
• An alarm will sound if your pulse is over the preset target.
• Range 0-30 ~ 240.
P (STOP)
• If there are no signal transmitted to the monitor for 4 seconds, the monitor will display “ ”.
Power On
When power on, the LCD monitor will beep and display all segments.
Stand-by Mode
The LCD monitor will enter stand-by mode after 4 minutes of inactivity. The monitor will display the current time, date and
room temperature in stand-by mode.
Press on any key to wake the monitor.