York Fitness Diamond R301Plus, Owner'S Manual, Page: 7 / 20

7
2. Attach the stabilisers
1. Keep the polyfoam block as packed on the front end of
main frame when you remove it from the carton.
- This polyfoam block will keep the front air fan covers
stable and avoid damage during the assembly proce-
dure.
3. Fix the front stabiliser to the main frame and secure,
using 2x carriage bolts, washers and nylon locknuts as
shown.
4. Fix the plastic nut caps onto the locknut heads.
5.
shown.
FIXINGS: FIXINGS:
x 2
x 2
Part
No.
12
x 2
Part
No.
35
Part
No.
11
x 2
Check the bolts are fully tightened by making
sure they penetrate
through the top of the nut
!
Part
No.
60
3. Attach the seat
1. Slide the seat with carriage assembly onto
the rower track carefully as shown.
seat
Make sure the wide part of the seat is
towards the rear end of the track.
!
60
35
12
11
poly foam
Take care to ensure the sensor wire
does not get trapped when you slide
the seat on.
!