York Fitness Diamond R301 Rower, Owner'S Manual, Page: 8 / 24

8
aSSemBLy InStrUCtIonS
StEp 5
Ask someone to help you hold the seat track still. 1.
Slide the rear stabilizer onto the seat track carefully 2.
and secure in position by using 2 x carriage bolts,
flat washers and nyloc cap nuts as shown.
make
sure the bolts are fully tightened with the nut
driver tool.
Part No. 51 x 2
55MM CARRIAGE BOLT
Part No. 35 x 2
FLAT WASHER
Part No. 36 x 2
NYLOCK CAP NUT
StEp 6
Remove the hand wheel knob & washer from the 1.
main frame carefully as shown.
Hold the whole rower with two hands and fold it 2.
towards floor until the poly-foam block stands on
floor stably.
Hold the seat track and fold it towards floor until the 3.
rear stabilizer stands on floor stably.
Fasten the hand wheel knob with washer to the seat 4.
track securely.
51
35
36
2.
1.
3.
4.