York Fitness Diamond R301 Rower, Owner'S Manual, Page: 7 / 24

7
aSSemBLy InStrUCtIonS
StEp 3
Ask someone to help you hold the seat carriage 1.
out of the way, and connect the computer wires as
shown - make sure it is fully connected.
Slide the seat track over the mounting support 2.
carefully and secure in position by using 2 x allen
head bolts, spring washers and flat washers.
Ensure the computer wires do not get trapped.
make sure the bolts are fully tightened with the
allen key.
Part No. 47 x 2
20MM ALLEN HEAD BOLT
Part No. 9 x 2
SPRING WASHER
Part No. 35 x 2
FLAT WASHER
StEp 4
Slide the seat carriage downwards to the end stop. 1.
Carefully hold and push the seat track downwards 2.
until the rear moving wheel stands on the floor. This
folds the rower to stand stably on the floor.
Secure the front post to the main frame in position 3.
with the hand wheel knob & washer as shown.
Part No. 48 x 1
HAND WHEEL KNOB
Part No. 49 x 1
LARGE FLAT WASHER
35
9
47
48
49
1.
2.
3.
rear moving wheel