2. Vnet/IP Network Configuration
2-13
TI 30A10A05-01E
Table Example of a V net router configuration (2/2)
Classification
Setting item
Setting value
Description
Constant
Transfer system time
Transfer lower
Direction where to transmit system time during
time synchronization. Specify one of the
following directions (*1):
• Transfer lower: Upper domain to lower
domain
• Transfer upper: Lower domain to upper
domain
Vnet/IP
Domain
Target Domain
(Check the check
box of the target
domain.)
When the transmission destination address
of a frame from a V net domain matches
the Vnet/IP domain definition, that frame is
transferred. In addition, only a broadcast frame
from a Vnet/IP domain specified in the Vnet/IP
domain is transferred to a V net domain.
It is not necessary to set a Vnet/IP domain to
which this V net router is connected because a
frame is always transferred in this case.
V net
Gateway
Station Name
(Station name) (*2) Specify the station address and domain
number of the bus converter defined in a V net
domain. When the transmission destination
address of a frame from a Vnet/IP domain
matches the lower domain definition, that
frame is transferred. In addition, only a
broadcast frame from the domain specified in
the V net domain definition is transferred to a
Vnet/IP domain.
It is not necessary to set a V net domain to
which this V net router is connected because a
frame is always transferred in this case.
Domain Number
(1~64)
*1:
If operation mode is set to “Backward Compatible Mode”, this setting is fixed at “Transfer lower.”
*2:
BCVVddss, BCVHddss, or BCVLddss (dd:domain number, ss:station number)
Aug.19,2011-00
Summary of Contents for Vnet/IP
Page 2: ...Blank Page...
Page 8: ...Blank Page...
