2. Vnet/IP Network Configuration
2-11
TI 30A10A05-01E
n
Connection example
The following figure shows an example of a bi-directional connection where the Vnet/IP system
(domain 2) is built on top of the existing V net system (domain 1) for CENTUM CS 3000 and
ProSafe-RS.
020207J.ai
L2SW
(Bus 1 side)
HIS0264
HIS0263
SENG0264
FCS0201
SCS0202
BCVV0203
(V net router)
Information Network
L2SW
(Bus 2 side)
SENG0164
HIS0163
SCS0101
FCS0102
V net
V net Domain
(Domain1)
Vnet/IP Domain
(Domain2)
Figure Example of a connection between Vnet/IP and existing V net
n
V net router setting
You can configure the V net router by using the CENTUM engineering function in Vnet/IP. You
can also configure the AVR10D style S3 router from CENTUM in V net. The following table shows
an example of a V net router configuration as shown in the previous figure.
Aug.19,2011-00
Summary of Contents for Vnet/IP
Page 2: ...Blank Page...
Page 8: ...Blank Page...