<Introduction>
iii
IM 21B03D01-01E
Introduction
Thank you for purchasing the Current-to-Pneumatic
Converter.
The Current-to-Pneumatic Converter is correctly
calibrated at the factory before shipment. To ensure
correct and efficient use of the instrument, please
read this manual thoroughly and fully understand
how to operate the instrument before operating it.
Regarding This Manual
• This manual should be passed on to the end
user.
• The contents of this manual are subject to
change without prior notice.
• All rights reserved. No part of this manual may
be reproduced in any form without Yokogawa’s
written permission.
• Yokogawa makes no warranty of any kind with
regard to this manual, including, but not limited
to, implied warranty of merchantability and
fitness for a particular purpose.
• If any question arises or errors are found, or if
any information is missing from this manual,
please inform the nearest Yokogawa sales
office.
• The specifications covered by this manual are
limited to those for the standard type under the
specified model number break-down and do not
cover custom-made instrument.
• Please note that changes in the specifications,
construction, or component parts of the
instrument may not immediately be reflected
in this manual at the time of change, provided
that postponement of revisions will not cause
difficulty to the user from a functional or
performance standpoint.
Safety Precautions
• For the protection and safety of the operator
and the instrument or the system including
the instrument, please be sure to follow the
instructions on safety described in this manual
when handling this instrument. In case the
instrument is handled in contradiction to these
instructions, Yokogawa does not guarantee
safety.
• Yokogawa will not be liable for malfunctions or
damage resulting from any modification made
to this instrument by the customer.
• For the intrinsically safe equipment and
explosionproof equipment, in case the
instrument is not restored to its original
condition after any repair or modification
undertaken by the customer, intrinsically safe
construction or explosionproof construction is
damaged and may cause dangerous condition.
Please contact Yokogawa for any repair or
modification required to the instrument.
• The following safety symbol marks are used in
this Manual:
WARNING
Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious
injury.
CAUTION
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
injury. It may also be used to alert against unsafe
practices.
IMPORTANT
Indicates that operating the hardware or software
in this manner may damage it or lead to system
failure.
NOTE
Draws attention to information essential for
understanding the operation and features.
三千控制阀网
www.cv3000.com
