YOKOGAWA UT35A-L, User Manual, Page: 49 / 150

6-4
IM 05P04D41-01EN
6.2 Setting Target Setpoint
Operation in the Operation Display
Operation
1
.
2
.
3
.
4
.
5
.
Press the Left arrow key to move one digit to the left.
(Press the Right arrow key to move one digit to the right.)
Press the Up or Down arrow key to change a setpoint.
Press the Up arrow key when 9 is displayed to move
one digit to the left.
Press the Down arrow key when 0 is displayed to
move one digit to the right.
Press the SET/ENTER key to register the setpoint.
Control with the new setpoint.
Bring the SP Display into view.
Press the SET/ENTER key to move to the setting mode
(the setpoint blinks).
Operation in Parameter Setting Display
Setting Display
Parameter Setting Display Operation Display >
PARAMETER
key for
3 seconds
(to [
SP
]
Menu Display) >
SET/ENTER
key (The setting parameter is
displayed.)
Setting Details
Parameter
symbol
Name
Display
level
Setting range Menu symbol
SP Target setpoint EASY
0.0 to 100.0% of PV input range
(EU) (Setting range: SPL to SPH) SP