YOKOGAWA UT350, Instruction Manual

Page: 32 / 82

2-10
<Toc> <2. Initial Settings>
IM 05D01D02-41E 1st Edition : May 31,2000-00
5.
Press the
S E T / E N T
key once to display the
menu “FUNC”.
P V
MAN
A / M
S P
AL1 2 3
SP
2 3 4
S E T / E N T
Displays
menu “FUNC”.
6.
Press the
S E T / E N T
key several times to
display the parameter “AL1” (alarm-1 type).
P V
MAN
A / M
S P
AL1 2 3
SP 2 3 4
S E T / E N T
Displays
parameter
“AL1”.
7.
Press the or key to display the
required setpoint. The figure below shows
an example of setting PV low limit alarm.
P V
MAN
A / M
S P
AL1 2 3
SP
2 3 4
S E T / E N T
Blinks during
change.
8.
Press the
S E T / E N T
key once to register the
setpoint.
You can take the same steps for alarm-2
type (AL2), and alarm-3 type (AL3) that are
displayed after this.
P V
MAN
A / M
S P
AL1 2 3
SP
2 3 4
S E T / E N T
9.
Press the
S E T / E N T
key for more than 3 sec-
onds. This returns you to the display
shown at power-on (figure below).
P V
MAN
A / M
S P
AL1 2 3
SP
2 3 4
S E T / E N T
Displays
target setpoint.
Displays PV.
10.
When setting an alarm setpoint, see “3.4
Setting Alarm Setpoints.”