manualshive.com logo in svg

YOKOGAWA UM330, User Manual, Page: 7 / 50

Share
Download
YOKOGAWA UM330 User Manual Download Page 7

<Toc>

<1.  Installation>

1-1

IM 05F01D02-41E

1.

Installation

This chapter describes installation, wiring, and other tasks required to make the
indicator ready for operation.

1.1

Model and Suffix Codes

Before using the indicator, check that the model and suffix codes match your order.

Model

Suffix Code

Description

UM350

UM330

Type

Digital indicator with Alarms (provided with retransmission output and 15 
V DC loop power supply as standard) 

-0

Standard type with three alarms

-3

Standard type with three alarms (with 24 V DC loop power supply)

0

None

1

With communication and additional alarm-4 

2

With additional alarm-4

Optional functions

Check that the following items are provided:

•

Digital indicator with alarms (of ordered model) .................... 1

•

Brackets (mounting hardware) ............................................. 1 pair

•

Unit label .............................................................................. 1

•

User’s Manuals .................................................................... 3 (A2 size)

•

User’s Manual (Reference) (CD-ROM version)
(only for indicators with optional communication functions) ... 1

1st Edition : May 31,2000-00

Summary of Contents for UM330



















































Reviews:

No comments