manualshive.com logo in svg

YOKOGAWA UM330, User Manual, Page: 42 / 50

Share
Download
YOKOGAWA UM330 User Manual Download Page 42

5-2

<Toc>

<5.  Parameters>

IM 05F01D02-41E

5.2

Lists of Parameters

*

Parameters relating to PV should all be set in real numbers.
For example, use temperature values to define alarm setpoints for temperature input.

*

The “User Setting” column in the table is provided for the customer to record setpoints.

*

Numbers in ( ) are the parameter setpoints that apply when the communication func-
tion is used. ex. OFF (0)

■

Operating Parameters

Parameter 

Symbol

Name of Parameter

Setting Range and Description

Alarm 1-setpoint

Alarm 2-setpoint

Alarm 3-setpoint

Alarm 4-setpoint

PV alarm: -100.0 to 100.0% of PV input range 

PV high limit 
alarm: 
100.0% of 
PV input range
PV low limit
alarm:
0.0% of 
PV input range 

PV input filter

OFF (0), 1 to 120 sec.
Used when the PV input fluctuates.

OFF (0)

PV input bias

-100.0% to 100.0% of PV input range span 
Used to correct the PV input value.

0.0% of PV 
input range 
span

(A1)

(A2)

(A3)

(A4)

(FL)

(BS)

PV peak value

Displays the maximum value of PV input during operation.
This parameter is not to be set.

PV bottom value

Displays the minimum value of PV input during operation.
This parameter is not to be set.

(PEAK)

(BOTM)

Initial Value

User setting

1st Edition : May 31,2000-00

Summary of Contents for UM330



















































Reviews:

No comments