4.4 Setting Methods for Main Items
43
IM FG410-01EN
4.4 Setting Methods for Main Items
This section describes the setting methods for the main items, mainly done on the Oscillator
setting screen. “Oscillator” is displayed at the top left of the Oscillator setting screen. When
another screen is displayed, pressing the
MENU key displays the top menu, so select
[Oscillator] and then press the
ENTER key.
The following explanation uses the text display screen (1 channel display) in the continuous
oscillation mode. The setting screen consists of one page only.
4.4.1 Configuration of text display screen in continuous oscillation mode
This screen is where the basic settings for the output waveform are done.
4.4.2 Setting the oscillation mode
1.
Select the [Mode] field and then press the
ENTER key to display the oscillation
mode choice list.
Even if there are several setting screens,
the [Mode] field is displayed at the top left
of each page.
2.
Select the desired oscillation mode from the choice list and then press the
ENTER
key to apply the setting and reflect it to the output.
The desired oscillation mode can also be set and reflected to the output by inputting the
number of the desired oscillation mode displayed in the choice list from the numeric
keypad.
The oscillation mode can also be set by inputting a number from the numeric keypad
while the [Mode] field is selected (without the choice list displayed).
MENU
ENTER
Oscillation mode
Frequency
Amplitude
DC offset
Phase
Waveform
Polarity and amplitude
range of waveform
(depending on the
waveform, additional
selection buttons may
be displayed)
Waveform-specific parameters
Oscillation
mode choice list
ENTER
ENTER
