IM 01C22K01-01E
8-4
8. BRAIN TERMINAL BT200 OPERATION
8.3 Setting Parameters Using the BT200
8.3.1 Parameter Summary
Instruments to which applicable:
F: Differential pressure transmitters
EJA110, EJA120, EJA118W, EJA118N, EJA118Y, and EJA115
P: Pressure transmitters
EJA310, EJA430, EJA438W, and EJA438N
L: Liquid level transmitters
EJA210 and EJA220
No.
Description
Model+capsule type
Tag number
Applica-
bility
P L
F
01
02
T0805.EPS
Rewrita-
bility
16 alphanumerics
GOOD/ERROR
Remarks
Item
MODEL
TAG NO.
Self-diagnostic result
—
—
—
03
SELF CHECK
Measured data display
A
–5 to 110%*
3
Menu name
DISPLAY
Output (in %)
A10 OUTPUT (%)
–19999 to 19999
Output (in engineering
units)
A11 ENGR.
OUTPUT
Unit specified in D30
Amplifier temperature
A20 AMP TEMP
Unit specified in D30
Capsule temperature
A21 CAPSULE
TEMP
—
Sensor type
B
16 uppercase alphanumerics
Menu name
SENSOR
TYPE
Model+span
B10 MODEL
—
Style number
B11 STYLE NO.
–32000 to 32000
Lower range-limit
B20 LRL
–32000 to 32000
Upper range-limit
B21 URL
–32000 to 32000
Minimum span
B30 MIN SPAN
—
—
—
—
—
Unit specified in D31*
1
Static pressure
A30 STATIC
PRESS
–32000 to 32000
Input (indicated as the
value after zeroing)
A40 INPUT
GOOD/ERROR, CAP MODULE FAULT, AMP MODULE FAULT,
OUT OF RANGE, OUT OF SP RANGE*
1
, OVER TEMP (CAP),
OVER TEMP (AMP), OVER OUTPUT, OVER DISPLAY,
ILLEGAL LRV, ILLEGAL HRV, ILLEGAL SPAN, and
ZERO ADJ OVER
Self-diagnostic
messages
A60 SELF CHECK
—
—
—
—
—
—
—
Maximum static
pressure*
6
B40
Same as A60
MAX STAT.P.
Self-diagnostic
messages
—
—
B60 SELF CHECK
Setting data
C
16 alphanumerics
Menu name
SETTING
Tag number
C10 TAG. NO.
Selected from mmH
2
O, mmAq,
mmWG, mmHg, Torr, Pa, hPa, kPa,
MPa, mbar, bar, gf/cm
2
, kgf/cm
2
,
inH
2
O, inHg, ftH
2
O, psi, or atm
Measurement range
units
C20 PRESS UNIT
–32000 to 32000(but within
measurement range)
Measurement range,
lower range value
C21 LOW RANGE
—
Self-diagnostic
messages
C60
Same as A60
SELF CHECK
—
—
—
—
–32000 to 32000(but within
measurement range)
Measurement range,
higher range value
C22 HIGH
RANGE
Selected from 0.2*
2
, 0.5, 1.0, 2.0,
4.0, 8.0, 16.0, 32.0, or 64.0 sec.
Damping time constant
C30 AMP
DAMPING
Selected from OUT:LIN; DSP:LIN,
OUT:LIN; DSP:SQR,
OUT:SQR; DSP:SQR
Output mode and
integral indicator mode
C40 OUTPUT
MODE
0.0 to 20.0%
LINEAR/ZERO
Low cut
D10 LOW CUT
Low cut mode
D11 LOW CUT
MODE
NORMAL %/USER SET,
USER & %/INP PRES, PRES & %
Display selection
D20 DISP SELECT
—
Auxiliary setting data 1
D
Menu name
AUX SET 1
—
Default Value
As specified when ordered.
As specified when ordered.
As specified when ordered.
As specified when ordered.
2.0 s*
2
As specified when ordered.
If not specified,
OUT: LIN; DSP: LIN.
10%
LINEAR
As specified when orderd.
–19999 to 19999
Engineering range,
lower range value
D22 DISP LRV
–19999 to 19999
Engineering range,
higher range value
D23 DISP HRV
8 uppercase
alphanumerics
Engineering unit for
display
D21 DISP UNIT
As specified when ordered.
As specified when ordered.
deg C/deg F
Temperature setting
units
D30 TEMP UNIT
deg C
