<
9. General Specifications
>
9-10
IM 01C25F01-01E
Contact Yokogawa representative for the codes indicated as ‘-’.
*1:
Applicable for Electrical connection code 2, 4, 7, 9, C and D.
*2:
Not applicable for option code /AL.
*3:
Applicable for output signal code D, E, and J.
*4:
Not applicable for measurement range 70 MPa (EJX6
0A D range and EJA5
0E /HG).
*5:
Applicable only for process connection code 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 or A, for those models which have a definition of “process
connection” in their suffix code structure.
Not applicable for a diaphragm seal system (EJXC40A, EJXC50A, EJAC50E, EJXC80A or EJAC80E).
*6:
Not applicable with color change option.
*7:
This specification is included when amplifier case code 2 is specified.
*8:
Check/External indicator terminals cannot be used when this option code is specified. Not applicable for output signal code F.
*9:
The unit of MWP (Max. working pressure) on the name plate of a housing is the same unit as specified by option codes D1, D3, and D4.
*10: Applicable for output signal codes D, E and J. The hardware error indicates faulty amplifier or capsule.
*11: Also see ‘Ordering Information’.
*12: Material traceability certification, per EN 10204 3.1B.
*13: Applicable for capsule code A.
*14: Applicable for capsule code B.
*15: Applicable for capsule code C.
*16: Applicable for capsule code D of EJ
510
and EJ
530
.
*17: Pure nitrogen gas or pure water is used for oil-prohibited use (option codes K1 and K2).
*18: Applicable for wetted parts material code S.
*19: Applicable only for output signal code -E and -J.
*20: The change of pressure fluctuation is monitored and then detects the impulse line blockage. See TI 01C25A31-01E for detailed
technical information required for using this function.
*21: Applicable for measurement span code D. If compliance with category III is needed, specify this option code.
*22: Applicable for EJX630A, EJA510E and EJA530E.
Not applicable for the combination of measurement span code A and wetted parts material code H.
Not applicable for option code K2, K3 or A1.
When specified range value includes minus value for A capsule, the accuracy shall be the standard accuracy even if high accuracy
option (/HAC) is specified.
*23: Applicable for capsule code D of EJX610A and EJX630A. Applicable also for EJA510E and EJA530E with /HG.
*24: Output status at CPU failure and hardware error is −5%, 0.8V DC or less for output signal code Q.
*25: The 1 to 5 V voltage output corresponding to 4 to 20 mA current output is applied to output signal code Q which is non-compliant to
NAMUR NE43.
*26: Applicable for capsule code D of EJA510E and EJA530E.
Optional Specifications (for Diaphragm Seal System)
Following table shows the option codes dedicated for EJXC50A or EJAC50E Diaphragm Seal System. These
codes cannot be specified without a diaphragm seal system. Please refer to the IM 01C25W01-01EN.
Item
Description
Code
Oil-prohibited use
Degrease cleansing treatment
K11
Degrease cleansing treatment and fluorinated oil filled capsule.
Operating temperature −20 to 80°C (−4 to 176°F)
K12
Oil-prohibited use with
dehydrating treatment
Degrease cleansing and dehydrating treatment
K15
Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule.
Operating temperature −20 to 80°C ( −4 to 176°F)
K16
Capsule fill fluid
Fluorinated oil filled in capsule.
Operating temperature −20 to 80°C (−4 to 176°F)
K13
