![YOKOGAWA DPharp EJA510E User Manual Download Page 55](http://html1.mh-extra.com/html/yokogawa/dpharp-eja510e/dpharp-eja510e_user-manual_911700055.webp)
<
9. General Specifications
>
9-4
IM 01C25F01-01E
Load for 4 to 20 mA output
(Output signal code D, E and J)
0 to 1290 Ω for operation
250 to 600 Ω for digital communication
Output Load for 1 to 5 V output
(Output signal code Q)
1 MΩ or greater (meter input impedance)
Communication Requirements “◊”
(Safety approvals may affect electrical
requirements.)
BRAIN
Communication Distance
Up to 2 km (1.25 miles) when using CEV
polyethylene-insulated PVC-sheathed cables.
Communication distance varies depending on
type of cable used.
Load Capacitance
0.22 μF or less
Load Inductance
3.3 mH or less
Input Impedance of communicating device
10 kΩ or more at 2.4 kHz.
EMC Conformity Standards
EN 61326-1 Class A, Table2
EN 61326-2-3
EN 61326-2-5 (for Fieldbus)
Immunity influence during the test
Pressure: Output shift is specified within ±1% of
1/20 Max span.
Static pressure: Output shift is specified within
±2% of 1MPa span.
Status Output Line*: Continues to operate
without reversal.
*: Only for /AL option.
Condition for EMC test for F
OUNDATION
fieldbus
type: The shield of the cable and the case
are connected with a capacitor of 10nF.
Physical Specifications
Wetted Parts Materials
Diaphragm, Process Connector
Refer to “Model and Suffix Code.”
Non-wetted Parts Materials
Housing
• Low copper cast aluminum alloy
• Low copper cast aluminum alloy with
corrosion resistance properties (copper
content ≤ 0.03%, iron content ≤ 0.15%)
(optional)
• ASTM CF-8M Stainless steel (optional)
Coating of housing
[for aluminum housing]
Polyester resin powder coating
[for option code /P
or /X2]
Epoxy and polyurethane resin solvent
coating
Degrees of Protection
IP66/IP67, Type 4X
Pipe
Polypropylene
Cover O-rings
Buna-N, fluoro-rubber (option)
Nameplate and tag
316SST (including /N4 wired tag)
Fill Fluid
Silicone, Fluorinated oil (option)
Weight
Capsule A, B and C: 1. 2kg (2.6 lb)*
Capsule D: 1.4 kg (3.1 lb)*
*: Without integral indicator and mounting bracket.
Add 1.5 kg (3.3lb) for Amplifier housing code 2.
Connections
Refer to “Model and Suffix Code.”