38
IM 701450-61E
GONogo Group
The commands in this group deal with setting power analysis parameters to be evaluated by the GO/NO-GO
determination.
:GONogo
:
PA Rameter
:
ITEM
<x>
:
TYPE
:
AH
<Space>
<NRf>
,
<NRf>
DONTcare
DONTcare
?
AHN
AHP
I2T
IAC
<Space>
<Voltage>
<Current>
<Voltage>
<Current>
,
DONTcare
DONTcare
?
IDC
IMN
INPeak
IPPeak
IPTopeak
IRMN
IRMS
LAMBda
P
Q
S
DONTcare
DONTcare
UA C
<Space>
,
?
;
;
;
;
UDC
UMN
UNPeak
UPPeak
UPTopeak
URMN
URMS
WH
WHN
WHP
Z
?
?
?
?
:GONogo:PARameter:ITEM<x>:TYPE:
<Parameter>
Function
Sets the power analysis parameter of the
waveform on which GO/NO-GO determination is
to be performed and the upper and lower limits
or queries the current setting.
Syntax
:GONogo:PARameter:ITEM<x>:TYPE:
<Parameter> {<{Voltage|DONTcare}>,
<{Current|DONTcare}>|<{Current|DONTcare}>,
<{Current|DONTcare>|<{{<NRf>}|DONTcare}>,
<{{<NRf>}|DONTcare}>}
:GONogo:PARameter:ITEM<x>:TYPE:<Parameter>?
<x> = 1 to 4
<Parameter> = {AH|AHN|AHP|I2T|IAC|
IDC|IMN|INPeak|IPPeak|IPTopeak|IRMN|
IRMS|LAMBda|P|Q|S|UAC|UDC|UMN|UNPeak|
UPPeak|UPTopeak|URMN|URMS|WH|WHN|WHP|Z}
Example
:GONOGO:PARAMETER:ITEM1:TYPE:
UDC -2v,2v
:GONOGO:PARAMETER:ITEM1:TYPE:UDC?
-> :GONOGO:PARAMETER:ITEM1:TYPE:
UDC -2.00,2.00
Description The power analysis parameters below can be
substituted using standard waveform
parameters.
UPTopeak, IPTopeak
= PTOPeak
UPPeak, IPPeak
= MAXimum
UNPeak, INPeak
= MINimum
UDC, IDC
= AVERage
URMS, IRMS
= RMS
UAC, IAC
= SDEViation
12 Communication Commands
