YOKOGAWA AQ6376E Getting Started Manual Download Page 4

Page: 4 / 99

IM AQ6376E-02EN

Manuals

The following manuals, including this one, are provided as manuals for this instrument. Please read
all manuals.

Manual Title

Manual No.

Description

AQ6376E

Optical Spectrum Analyzer

User’s Manual

IM AQ6376E-01EN The manual is located on the CD included

in your package (pdf format). Explains

all functions and operating procedures of

the AQ6376E except remote control and

program functions.

AQ6376E

Optical Spectrum Analyzer Getting Started

Guide

IM AQ6376E-02EN This manual. This guide explains

the handling precautions, installation

procedure, basic operations, and

specifications of this instrument.

AQ6376E

Optical Spectrum Analyzer Remote Control

User’s Manual

IM AQ6376E-17EN The manual is located on the CD included

in your package (pdf format).Explains

functions for controlling the instrument

with communication commands and

program functions.

Optical Spectrum Analyzer

IM AQ6360-92Z1

A document for China.

Safety Instruction Manual

IM 00C01C01-01Z1 A document for the EU.

The “EN”, “E”, and “Z1” in the manual numbers are the language codes.

Manuals in the CD

The English directory in the manual CD contains the PDF files shown below. The CD also
contains Japanese manuals.

File Name

Manual Title

Manual No.

Features & Operation Manual.pdf

AQ6376E Optical Spectrum Analyzer

User’s Manual

IM AQ6376E-01EN

Communication Interface.pdf

AQ6376E

Optical Spectrum Analyzer

Remote Control User’s Manual

IM AQ6376E-17EN

Online Help

The content similar to the IM AQ6376E-01EN, is included in this instrument as a help file (some
the content may be omitted). For instructions on how to use the help file,
see section 9.7 in the IM AQ6376E-01EN.

Summary of Contents for AQ6376E




































































































Search results

Summary of Contents for AQ6376E

Reviews:

Related manuals for AQ6376E

Brands by name

Popular brands

YOKOGAWA AQ6376E, Getting Started Manual

Search results

Summary of Contents for AQ6376E

Reviews:

Related manuals for AQ6376E

Brands by name

Popular brands