manualshive.com logo in svg

YOKOGAWA AQ6376E, Getting Started Manual

Share
Download
YOKOGAWA AQ6376E Getting Started Manual Download Page 61

4-2

IM AQ6376E-02EN

Displayed Waveform Operation

Waveforms can be moved or zoomed using touch panel operation.

Moving a Waveform

With the waveform displayed on the screen, drag the waveform display area in any direction.
•  Dragging diagonally causes movement in both vertical and horizontal directions at the same 

time.

•  Dragging vertically or horizontally limits the movement to vertical or horizontal movement.
•  When a waveform is moved vertically, the reference level also changes in sync.
•  When a waveform is moved horizontally, the zoom center wavelength (center frequency or 

center wavenumber), the zoom start wavelength (start frequency or start wavenumber), and the 
zoom stop wavelength (stop frequency or stop wavenumber) also change in sync.

Zooming a Waveform

With the waveform displayed on the screen, pinch out or pinch in the waveform display area in any 
direction.
•  Pinching out or pinching in vertically or horizontally limits the zoom operation to vertical or 

horizontal zoom.

•  When a waveform is zoomed vertically, the log scale (linear scale) changes in sync.
•  When a waveform is zoomed horizontally, the displayed sweep span changes in sync.
•  Pinching out or pinching in diagonally causes the waveform to be zoomed both vertically and 

horizontally at the same time.

4.1  Touch Panel Operations

Summary of Contents for AQ6376E




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands