IM AQ1210-02EN
25
Screws
1.
Loosen the battery cover screws with a Phillips
screwdriver until the screw head moves up and down.
2.
Pull the battery cover toward you, lift, and remove.
Battery cover
3.
Connect the battery pack’ s power supply lead wire
plug to the instrument’ s battery connector.
Battery pack
Plug
4.
Secure the power supply lead wires on the
instrument’ s cable hook.
Plug
Battery pack
Cable hook Power supply lead wires
5.
Insert the battery pack so that the power supply lead wires are facing
the bottom panel side from the lower right of the battery pack. Make
sure that the power supply lead wires do not protrude from the battery
case. Check that the entire battery pack is completely inside the case.
Battery cover
Battery pack
Hooks
Face the hook of
the plug toward
the bottom panel
side.
Label with barcode
Label with
barcode
The lead wires are
from the lower right
of the battery pack.
Making Preparations for Measurements
