54
IM AQ1210-02EN
MAP Screen
5.2, “Analyzing in MAP Mode” in the User’s Manual
The event analyzed in TRACE mode on the previous page is displayed as an icon on the MAP screen.
4.
Tap
MAP
to change to the MAP screen. When the MAP screen is displayed, the MAP button changes to a TRACE button.
If you execute an averaged measurement after displaying the MAP screen, the event is displayed as an icon automatically when the
measurement is completed.
Switches to the waveform view.
Dist. between events
Distance from the measurement reference point
Change the event type.
: Reflection
: Positive splice loss
: Negative splice loss
: Bending loss
(macro bending)
: Splitter insertion loss
Displaying the Analysis Results
See the TRACE screen on the
previous page.
Event Icon Display
The event selected in the event analysis result display is shown at the center.
Tapping the icon of another event on the screen will show that event at the
center. You can move the icon horizontally by dragging the icon.
You can change the event type by tapping the icon shown at the center.
Analyzing Waveforms and Events
