YOKOGAWA ADMAG AXR User Manual Download Page 200

Page: 200 / 200

iii

IM 01E30D01-01EN

Edition

Date

Page

Revised Item

5th

Mar. 2016

1-3 to 1-4

1.1 (7) to (9)

Added the sentence for Modification, Product Disposal

and Authorized Representative.

4-8

4.6 (1)

Corrected the trademarks.

8-1

Corrected the trademarks.

9-1

Corrected the trademarks.

12-2

12.1

Corrected HART and Protection.

12-5

Added the material for Grounding Ring and Grounding

Electrode.

12-7

12.3

Added the sentence for CE marking.
Deleted "EN61010-1" in Safety Requirement Standards.
Deleted the sentence for PED.

12-9

12.5

Added the material for Grounding Ring and Grounding

Electrode.

12-11

Added the material for Grounding Ring and Grounding

Electrode.

12-15

12.6

Added the optional code CF1 for CSA certification.

12-22

12.7

Corrected the flange thickness for size 150mm, ANSI

Class 300.

13-1

13.

Added the sentence for PED.

14-3

14.1 (6)

Corrected the figure for name plate.

14-4 to 14-6

14.3

Added the sentence for CSA certification.

14-8

14.4 (6)

Corrected the figure for name plate.

Appendix

Added "EU DECLARATION OF CONFORMITY"

6th

Mar. 2017

1-1

Added a description at Regarding This User’s Manual.

3-6

Deleted the optional codes BCF and BCC.

3-7

Deleted the optional code BCF.

3-8

Deleted the optional code BCF.

3-9

Deleted the optional codes BCF and BCC.

12-5

Deleted the optional codes BCF and BCC.

12-7

SIL 2: certified by exida.

12-9

Added a note.

12-12

Added a note.

12-14

Deleted the optional codes BCF and BCC.

Changed the model number of gasket.

12-15

Deleted the optional codes BCF and BCC.

13-1

Changed the table for PED (Pressure Equipment

Directive).

A1-2

Added a description of the proof test coverage.

7th

May. 2017

Appendix

Added “■Notes for the Identification Tag” and “■Addition

of description for Special Specifications”.

8th

Apr. 2020

12-7

A1-2

A1-3

Update SIL Certification:IEC 61508 2010

Update Table A1.2.2 Proof Testing

Added A1.2.9/10 FMEDA notes

Summary of Contents for ADMAG AXR









































































































































































































Search results

Summary of Contents for ADMAG AXR

Reviews:

Related manuals for ADMAG AXR

Brands by name

Popular brands

YOKOGAWA ADMAG AXR, User Manual

Search results

Summary of Contents for ADMAG AXR

Reviews:

Related manuals for ADMAG AXR

Brands by name

Popular brands