background image

Swing Back Gate With Double Locks Instruction

IMPORTANT: KEEP FOR FUTURE REFERENCE

Read the entire Instruction before assembling and installing this product.

If you sell or give away this product, make sure you give this Instruction to the new owner. Thank you.

T h i s  s a f e t y g a t e  c o m p l i e s w i t h  B S E N 1 9 3 0 : 2 0 0 0

( F O R  S G 0 5 - 1 5 )

01.Never leave child unattended. This product may not prevent all accidents.

02.This product is intended for use with children from 6 to 24 months of age.

03.Danger to older children climbing over the safety barrier.

04.The safety gate should not be placed on any stair below the level of the top stair unless it is placed on the

 

 bottom stair or the lowest on which it can be fixed.

05.The position of the safety gate in relation to the stairs may have an adverse effect on your child safety.

06.This safety gate shall not be fitted across window openings and the like.

07.To prevent serious injury or death, securely install and operate this gate according to the instructions.

08.Install this gate away from open flames and heat sources.

09.The general condition of the safety gate should be checked periodically to ensure gate remains securely

     installed, and   locking system and auto-close mechanism function properly.

10.Do not use the safety gate if any components are damaged or missing.

11.Never use without fixing cups.  

12.Fixing surfaces must be suitable for the purpose and structurally sound.

13.Incorrect fitting or positioning of this safety barrier can be dangerous.

14.Any additional or replacement parts should only be obtained from DEMBY DEVELPOPMENT CO., LTD.

15.Stop using the barrier if the child is capable of climbing it.

!

W A R N I N G

Parts List

NO.

Parts

Name

Qty.

1

gate frame

1

2

gate panel

1

3

Upper latch set

1

4

release button

1

5

tension knobs

4

6

bolts with rubber pads

4

7

mounting cups

4

8

lower locking rod

1

9

upper bushing

2

10

lower bushing

2

11

left upper corner

1

12

1

Right upper corner

13

1

Wrench

1

2

3

4

5

6

7

8

9

1 0

1 2

1 1

1 3

1. Incorrect installation can be dangerous.
2. Do not use the safety gate if any components are damaged or missing.
3. This product is intended for use with children up to 24 months of age.
4. If the safety barrier is used on top of the stairs it should not be positioned below the top level.
5. If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the

lowest tread possible.

6. This safety gate shall not be fitted across window openings and the like.
7. The general condition of the safety gate should be checked periodically to ensure gate remains  

securely installed, and locking system and close mechanism function properly.

8. Fixing surfaces must be suitable for the purpose and structurally sound.
9. Incorrect fitting or positioning of this safety gate can be dangerous.
10. Danger to older children climbing over the safety gate.
11. Any additional or replacement parts should only be obtained from the manufacturer or distributor.
12. Stop using the gate if the child is capable of climbing it.
13. This safety barrier conforms to EN1930:2011
14. Check that the safety barrier is correctly closed
15. This safety barrier is for domestic use only

MYGATE MG1

Yngri

 

Y

1

Swing back gate with double locks

INSTRUCTION

IMPORTANT: KEEP FOR FUTURE REFERENCE

Read the entire instruction before assembling and installing this product.

If you sell or give away this product, make sure you give this instruction to the new owner.

This safety gate complies with BS EN 1930:2011

ENGLISH

1.  Incorrect installation can be dangerous.

2.  Do not use the safety gate if any components are damaged or missing.

3.  This product is intended for use with children up to 24 months of age.

4.  If the safety barrier is used on top of the stairs it should not be positioned below the top level.

5. If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread 

possible.

6.  This safety gate shall not be fitted across window openings and the like.

7.  The general condition of the safety gate should be checked periodically to ensure gate remains securely in-

stalled, and locking system and close mechanism function properly.

8.  Fixing surfaces must be suitable for the purpose and structurally sound.

9.  Incorrect fitting or positioning of this safety gate can be dangerous.

10.  Danger to older children climbing over the safety gate.

11.  Any additional or replacement parts should only be obtained from the manufacturer or distributor.

12. Stop using the gate if the child is capable of climbing it.

13.  This safety barrier conforms to EN1930:2011

14.  Check that the safety barrier is correctly closed

15.  This safety barrier is for domestic use only.

16.  This safety barrier has an automatic closing system.

Summary of Contents for Y1













Reviews: