YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
36
Remote Controller
Turning On
Press once to turn the system on or off. Indoor Unit Display will light up when On.
Notes:
During operation, a unit may take a few moments to switch modes. Wait at least 3
minutes between Mode changes.
In HEAT Mode, the unit will not blow air when powered on. Preheating can take 2-5
minutes before the unit begin blowing warm air.
When restarting the unit, wait 3 minutes for it to resume operation.
Selecting Mode
Each time MODE button is pressed, the operation mode is changed in the following
sequence:
Heating mode is NOT available for cooling only air conditioners.
Fan Mode
Each time the FAN button is pressed, the fan speed is changed it the following sequence:
In FAN ONLY mode, AUTO is not available.
In DRY mode, fan speed is set to AUTO automatically. FAN button is not adjustable in DRY mode.
Setting Temperature
Press once to raise the set temperature 1
°
F (1
°
C)
Press once to lower the set temperature 1
°
F (1
°
C)
Available Temperature Ranges
Mode
Range
HEATING, COOLING
61°F ~ 86°F (16°C-30°C)
DRY (Dehumidify)
-7°F ~7°F
FAN
Not Available
Notes:
Press and hold the MODE and
for 3 seconds to change temperature display between °F to °C
HEATING Mode is not available on Cooling Only models.
In DRY Mode, the unit can decrease or increase 7°F above or below the temperature set on the remote controller.
