YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
YMGI: Your Modern Green Idea
53
Fan Direction and Fan Speed
To Change fan speed, push
FAN
button.
The indoor fan will change speed in the following sequence:
Automatic → HIGH → MED → LOW
Each time you push the button the unit will cycle to the next speed setting.
To change wind direction up and down push
SWING
button.
The swing blade will change the fan direction sequence time you push the button.
The Recommended Wind Direction of Up and Down
Normally use (Automatic Mode)
Set louvers to position 1 to 3 when in cooling or dehumidifying modes.
Set louvers to position 3 to 5 in heating mode.
Use the left-right guide louvers to
direct the fan’s air flow left or right.
When push the
SWING
button, the louvers will swing up and down.
Push the
SWING
button again, the swing mode will be cancel
SLEEP MODE
To set Sleep mode, make sure the unit is in Cooling or Heating mode.
Press the
SLEEP
button.
The “sleep” icon will appear on the control panel display.
CLOCK
To set the clock on the remote control, hold down either the MIN or HOUR button until the time flashes on the remote
control display. Change the minutes by pressing the MIN button and change the hours by pressing the HOUR button. Set
the clock prior to programming the timer.
TIMER
To program the timer:
Press the T-ON button.
Once T-ON is pressed the auto-on timer will blink in the bottom right rectangle of the remote control display.
Press the MIN and HOUR buttons to change the clock to the desired time for the unit to automatically turn on.
The minutes will increase by 10 with each press of the MIN button and the hours will increase by 1 with each
press of the HOUR button.
Press the T-OFF button and the remote control display will flash the desired auto-off timer.
Press the MIN and HOUR buttons to change the clock to the desired time for the unit to automatically turn off.
The timer is set when the auto-
off time stops flashing and the words “ON” and “OFF” are displayed next to the
time.