Software Parts
current screen ID is saved in D(0+D(10)),namely saved in D(0+5)=D5.In “Data” box ,you can choose
In “Data” dialog box ,you can choose data format from “Dec”, “Hex”, “Float” and “Unsigned”. Also ,you
s
s”,
still set “5” in D10, “3” in “Times” box, it means that the address stored is
Word of Dword (double word).
can et “Time
if
D(0+3*D(10))=D15.
Clock
TP s ies touch screen s
lock
er
et c
inside, as shown above, this function can educe and save the current time.
Tick “Use RTC”, set device, station and particular address in the device. As shown in the above figure,
11 of the device with PLC port , station NO. 1
The function of “Indirect” is as same as described in
P46
.This manual will not introduce this function in the
hapters, please refer to P45 for detail introductions.
storage current time in D
following c
45
Summary of Contents for TOUCHWIN TP Series
