YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 69 / 264

Software Parts
3-5. Tool
“Tool” Menu mainly contains several basic tools, s as “Line”, “Rectangle”, “Ellipse”, “Fold”, “Map”
nd “Option”.
uch
a
Note: “Arc”, “Polygon Block”, “Frame” can be used from “Draw” toolbar.
Line “ ”
Describe line or bias, both of which can be set line weight, line length and color.
Arc
“ ”
Draw arc, and use these arcs to form sector .Also, you can set their size, line weight, position, color and
filling pattern.
Rectangle “ ”
It is used for protracting rectangle or square, which can be set line weight, size, color, position and
filling pattern.
Ellipse “ ”
It is used for protracting ellipse. It’s setting is similar with rectangle, containin line weight, color, position
and filling pattern. g
Fold/Polygon “ ”
It is used for protracting Fold or Polygon and its setting contains line weight, color, position, rotary angle
and so on.
Polygon Block
“ ”
It is like a container, you can set block value ,color, direction and so on.
Frame
“ ”
It is similar with rectangle, but it has third dimension as its effect ion is three-dimensional .Also, you can
set its color and position.
59