YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 142 / 264

Software Parts
5-19. Call Window
se it:”
) Create a new window to be transferred. Set the window’s size, name and other information.
“Call Window” is used for opening the needed window by controlling coils (open or close).The following
describes how to u
1
”
in Part toolbar and place it on the screen. 2) Click
“
3) Click the property button. Set the relay’s type and address in object tab page and set the window No.
called in Window tab page. When the middle relay is in the state of ON, the window to be called will
popout. When it is OFF, the window will be close. As shown in the following maps.
132