YING ELECTRONICS TOUCHWIN TP Series, User Manual

Page: 67 / 264

Software Parts
It is similar with Date as it is used for display time on the touch screen to make relevant operation of
time convenient.
Buzzer
“ ”
Spring buzzer by controlling a certain coil or a bit component in a certain register. This function can
carry out alarm and prompt functions. Refer to chapter 6-3 for particular usage.
LCD Light Control
“ ”
Similar with buzzer, it is used for starting light to prompt user while using TP by controlling a certain
coil or a bit component of a register. Refer to chapter 6-4 for particular usage.
13) Device
It contains devices such as “Instrument”, “Valve”, “Pipe”, “Pump”, “Auto
ind”, “Motor” and “Retort”,
which are widely used in industry automatization. These device buttons can be used in graphics software
directly, therefore, the workload can be reduced.
nt “
W
Instrume ”
g numerical value as voltage meter and
ampere meter. Refer to chapter 6-5 for particular usage.
Valve
“
It is point to dial instrument used for prompting and readin
”
Its meaning and usage are similar with valves which used in normal industrial control area. Refer to
chapter 6-6 for particular usage.
Pipe
“ ”
Show the change and flow direction of numerical value by liquid format. Refer to chapter 6-7 for
particular usage.
Pump
“ ”
It is similar with pump used in normal industrial control area. Refer to chapter 6-8 for particular usage.
Auto Wind
“ ”
It is similar with Auto Wind used in normal industrial control area. Refer to chapter 6-9 for particular
usage.
Motor “ ”
It is similar with motor used in normal industrial control area. Refer to chapter 6-10 for particular usage.
Retort
“ ”
retort used in normal industrial control area. Refer to chapter 6-11 for particular usage.
14) Invert Alarm Information
“
It is similar with
”
Invert Alarm Information
It is specially used for invert alarm. With it, you can set max or min value of each alarm information and
57