YiJiu YJ-2S, User Manual

Page: 9 / 16

9
Shaker Part
1). CONTROL PANEL INTRODUCTION
T1 button
（
1 min button
）
: press this button, the clamping plate automatically clamps the canister,
and finish appointed 1 minute mixing.
T2 button
（
3 min button
）
: press this button, the clamping plate automatically clamps the canister,
and finish appointed 3 minutes mixing.
T3 button
（
5 min button
）
:
press this button, the clamping plate automatically clamps the canister,
and finish appointed 5 minutes mixing.
T1+T2: Press T1+T2 at the same time , clamping plate automatically clamps the canister, and finish
appointed 4 minutes time mixing.
T1+T3: Press T1+T3 at the same time , clamping plate automatically clamps the canister, and finish
appointed 6 minutes time mixing.
T2+T3: Press T2+T3 at the same time , clamping plate automatically clamps the canister, and finish
appointed 8 minutes time mixing.
T1+T2+T3: Press T1+T2+T3 at the same time , clamping plate automatically clamps the canister,
and finish appointed 9 minutes time mixing.
Button (Stop, lift button) :
A). When machine is in the state of "Mixing" or "Clamping", LCD shows "Mixing" or
"Clamping". At this time, press this button, machine will stop mixing or clamping and lift the
clamping plate.
B). When machine is in the "ready" state, LCD shows "Ready". At this time, press this button,
the clamping plate will lift up, and stop when you release the button.
Attention:
The timer buttons are only available for setting when the machine is under state of "Ready".
Button: Emergency button:
Press this button to stop machine if some abnormality happened. Turn clockwise this button to
reinitialize machine to let the clamping plate move up to initial place.