11
You can set the parameter of item as below:
1. Big can force: for the can with height more than 300mm
2. Middle can force: for the can with height 110-300mm
3. Small can force: for the can with height less than 110mm
4. Move-up speed: upper clamping plate move up speed
5. Move-up force: upper clamping plate move up distance
6. Move-down speed: upper clamping plate move down speed
7. Move-down force: upper clamping plate move down distance
8. Reset speed: upper clamping plate move up speed when turn on the machine
9. Reset force: upper clamping plate move up distance when turn on the machine
10. Language select: only Chinese or English can be choose
Noted: All above parameter is relative value rather than absolute value.Please adjust the
parameter according to the actual situation on site. The number bigger, the pressure bigger,
the speed faster.
4).DEFAULT PARAMETERS
Big can force
50
Middle can force
50
Small can force
50
Move-up speed
90
Move-up force
60
Move-down speed
90
Move-down force
45
Reset speed
90
Reset force
55
7. MAINTENANCE OF MACHINE
To safeguard the normal operation of the machine, prolong its life, utilize its economy value to the
maximum, please kindly insist in the daily maintenance work.
1. Only professionals are allowed to disassemble the machine.
2.Inspect if all stirrers work during dispensing colorant;
3.Check if the nozzles get blocked;
4.Check if the rubber O-ring on valve handle of canister is lost;
5.Check the amount of canister colorant. Add in time when insufficient;
6. Inspect if the canisters get loose (if yes, please fastener with special tool);
7. Inspect if the gauge shaft get loose (if yes, please fasten with special tool. But don't be too hard
during fastening to prevent sliding).
8. Clean the screw rod and guide pin with engine oil every three months.
9. Solve in time if there’s any problem.
Summary of Contents for YJ-2S
Page 16: ...16 Shaker Part ...
