YiJiu YJ-2S, User Manual

Page: 10 / 16

10
2) OPERATION INSTRUCTION
The machine applies fully automatic intelligent control, which is easy to operate. Here are the
operation details.
1. Plug in and switch on the power at back of the machine. LCD will show the serial no. Of the
machine, and start to initialize. After initialization, LCD shows "Ready". It means the machine is ready
for working.
2. Open the transparent door, place the canister onto the plate, and push to the centre of loading
plate. If the canister has handle, then use spring hook to draw the handle. Then shut the door.
3. According to the mixing time needed, press the time button to set up the time. Now, the clamping
plate automatically moves downwards. LCD shows "Clamping" & "Mixing time". After the canister
clamps for 2~3 seconds, the machines starts high speed shaking mixing. LCD shows "Mixing" & the
balance mixing time (counting down).
4. When time is up, the machine stops mixing. After 3 seconds, the clamping plate automatically lift
up and loosen the canister. LCD shows "Pls wait", and the plate will lift up to a initial height.
5.The LCD shows “finish mixing”, open the door and take out the pail of paint.
(
Attention:
if need to mix one more time, you need to open the door then close again, otherwise, it
won’t mix)
6.Everyday after use, please clean the dirty things or spilled paints. keep the inside machine and
screw rods clean.
3) PARAMETER SETTING INSTRUCTION
1. Press the button and turn on the power in the same time untill the LCD shows “big can
pressure”, then release the button and press “ T3” button to choose the parameter you want to set.
2.
When you press "T1" button, the number will add "1" each click. If you don’t release the “T1”
button, the number will increase continuous automaticall; When you press "T2" button, the number
will reduce "1" each click. If you don’t release the “T2” button, the number will decrease continuous
automaticall; pess to save the parameter when finish setting.
NOTICE
：
1. No mixing with empty load!
2. Frequent start the machine is forbidden. The machine could not be started over 20 times within one
hour.
3. Please press "Emergency" button in case there is any accidental noise. Find out the reasons, and
solve the trouble. After this, you can restart again.
4. If you come across any failure during initialization or clamping, please press "Emergency" button to
reinitialize the machine.