YiJiu YJ-2S, User Manual

Page: 6 / 16

6
5. Check that the environment where the machine is installed conforms to local regulations (a permit
issued by local authority may be necessary) and avoid dangerous concentration of paint cans around
the equipment. It’s forbidden to stock inflammable materials or other materials inside the machine.
It’s forbidden to use free flames, incandescent objects or equipment that are able to create sparks in
the local where the machine is installed.
6. It is recommended to install a ventilation system to guarantee that the concentration of dangerous
vapour around all electrical components is less than 30%.
7. Take the paint can out from the machine at the end of the work. If you don’t use the machine any
more, cut off its power supply.
8. In the locations where the machine is installed, the prohibition symbols “No Smoking/ Burning”
have to be placed at 5 meters from the machine. The equipment is constructed for the treatment of
non-explosion materials. It is forbidden to use this machine with inflammable or explosion vapors.
9. Don’t switch off the machine with the can inside.
10. Do not place any damaged packaging in the machine. Running the machine with damaged
packaging is at “user’s” risk. Already damaged packaging may cause damage to your machine.
During the maintenance respect the security rules and the procedure described in its Paragraph.
11. If the paint can has a handle, make sure the handle is firm, otherwise, disconnect it.
12. Before shaking, please check whether the paint can be located at center place of the bottom
plate. If it’s not at the center place, adjust it to the center place.
13. Before starting the machine, please check whether there are objects that block the machine’s
shaking. If there are such objects, take them out of the machine before you start .
5. PREPARATION BEFORE USE
Please know well the following points to make sure smooth operation after machine is installed.
1. Check if the power switch of machine is at off state before plugging in.
2. Make sure Emergency button is released, and the door is closed.
3. Canister must be well sealed and without damages. It should be placed on the centre of loading
plate.
6. OPERATION INSTRUCTION
Manual Dispenser Part
1) .STIRRING FUNCTION INTRODUCTION
This dispenser offers both automatic stirring and manual stirring functions. If you use automatic
stirring function, please turn on the power, micro-computer timer will stir every 4 hours automatically
，
and the stirring time is 5 minutes. The dispenser should be kept power on during automatic stirring.
If you use manual stirring, you only need to press the power button, After 5 minutes stirring,it will stop
automatically.