no aIr flow
If there is slower and/or no air flow at all, the
motor starter’s capacitor or the motor itself
may require replacement. Please contact your
Cooling Monsters reseller for checks or repairs.
no water flow
Check the water level indicator and ensure
water tank is at least 50% filled. If there is
sufficient water in the tank and COOL mode is
on, the water pump or the control button may
not be functioning properly. Please contact your
Cooling Monsters reseller for checks or repairs.
weakened CoolIng effeCt
If you experience weakened cooling effect,
there is a chance that the water and/or filter
is dirty. Simply conduct regular cleaning. If
problem persists, you can contact your Cooling
Monsters reseller for checks.
SIMPle troUBleShootIng
a) Loosen the screwed on stopper over the drainage outlet and drain the remaining water from the
water tank.
b) Remove and wash the air inlet shutter along with the evaporation heat exchanger before installing
them back to the cooler.
Attention: During cleaning, do not subject any part(s) of the cooler to high pressure water. Please do not
use acidic or alkaline detergents to wash the filters and/or evaporative media.
SIMPle MaIntenanCe
Summary of Contents for Cooling Monsters CM90-BUV
Page 1: ...Evaporative Cooling CM90 BUV...
Page 12: ......
