Yeti Cooling Monsters CM90-BUV, Manual

Page: 7 / 12

1. Remove the product from the packaging.
2. Fix the wheels to the product using the screws
provided with a screwdriver.
3. Swivel casters with brakes to be installed in the
front 2 wheel positions, while the other 2 casters to
be installed at the remaining wheel position of the
product.
4. The product should be used on a flat surface.
5. Add water to the water tank via the water input slot
located behind the product.
6. Avoid splashing water onto the motor to prevent
damaging the electrical components in the unit.
7. To prevent overflowing, always fill the water BELOW
the maximum level indicated by the label pasted in
front of the product.
8. Only use clean water to fill up the water tank.
9. For permanent product usage, link up a permeant
water hose for continuous water supply to the water
tank. There is a build in valve for automatic refilling.
when yoU fIrSt got yoUr
Cooler, theSe are the eaSy
StePS to get It Started